Method for quickly winding hose protective sleeve

Regardless of whether it is a car wash tube or a hose used in other machinery, in order to prolong its service life and avoid being damaged by the harsh environment of the outside world, everyone will prepare a set of "new clothes"-hose spiral protective sleeves for the hose. With it, the life of the hose will be greatly extended. But do you know how to quickly install the hose protection sleeve? The following as a professional protective sleeve manufacturer to introduce to you, I hope to help you quickly install the hose protective sleeve. Below I will introduce three methods for quickly installing the hose protective sleeve by hand.

The first one: Start winding from one end to the other. Wrap the spiral protective sleeve around one end of the hose for positioning. After positioning, start winding to the other end until the protective sleeve is completely wrapped outside the hose, then the installation is complete.

 

The second kind: tool assistance, clever installation. We first wound the spiral wound tube on a section of the hose to fix it, and then inserted a screwdriver into the protective sleeve that was not wound, and rotated the wire to quickly wind it.

 

The third kind: Need to wrap the part of the hose in the middle of the winding tube, start winding from the middle, and change the other end after a section is wound. The end of the winding tube is connected to the end of the wire and cable. After fixing, the spiral winding tube is reversed and loosened. After random rotation, the hose at both ends is balanced, and the two ends of the winding tube are wound outside the hose, so that we will wire The winding was successful.

These are the three common ways to quickly install hose protection sleeves, do you think it is practical? If necessary, you can choose Runte Rubber Plastic spiral protective sleeve made of modified PP material, the quality is guaranteed, please come to consult