How to install pp hose guard
Author:admin Addtime:2019-05-20 16:47:22 Click:
1 Turn the middle part of the hose (wire, cable) around the middle part of the winding tube, and start from the middle of the winding to the end of the hose (wire, cable);
2 After the end of the hose (wire, cable) is finished, the spiral protection sleeve is positioned at the joint of the hose (wire, cable). After positioning, the spiral wound tube is reversed and loosened, and can be moved at will, and starts to rotate from the wrapped intermediate portion to the other end;
3 Wrap both ends of the spiral protective cover around the outside of the hose (wire, cable) and install it.
